Why you shouldn't use bleach to get rid of mould in winter and how to do it in seconds with vinegar

Jenita Betsy
Jun 18, 2022
Share

When mould grows on bathroom walls and tiles, many people turn to bleach and harsh chemicals to get rid of it. However, a mycologist, who studies fungi for a living, believes that this is one of the worst methods for removing poisonous growths from your home.

 

'The fungi have melanin, and the bleach simply removes the colour, but the fungi are still present; you are only disguising them,' Heike Neumeister-Kemp told the ABC.

'It appears to return six weeks later, but it was never gone.'

A vinegar and water solution is one of the most effective ways to remove thick strands of mould.

Simply combine 80 percent vinegar and 20% water in three buckets.

Better Homes and Gardens advised, "Grab a microfibre cloth, dip it in the first bucket, and clear an area of mould."

'Rinse the fabric in the second bucket, then in the third bucket. 'Repeat until the mould is completely removed.'

According to Mr Neumeister-Kemp, this works because vinegar'mechanically' destroys the fungi.

Mold grows for a variety of reasons and in a variety of places.

In general, if you see or smell mould, you should clean it up and remove it as soon as possible, as mould can damage the surfaces it develops on. The more it expands, the more harm it can do.

Mould will only grow if there is enough moisture present. The first step in dealing with mould is to figure out where the moisture is coming from.

Mold can grow in areas of a home that are wet or have poor ventilation, such as:

By using heat, insulation, and ventilation, you may avoid creating circumstances that encourage mould growth. Ventilating a room by opening a door or window is the cheapest and easiest technique to reduce moisture and humidity levels. When possible, use exhaust fans.

'So it penetrates the structure via osmosis and explodes it, killing the fungi,' says the researcher.

FEMAIL has already tried to figure out how to get rid of the black stuff using other methods.

Big Red Carpet Cleaning in Townsville gave some advice on how to be safe when dealing with huge infestations.

They stated on Facebook, "Vacuum over the mould with a hepa vacuum to eradicate mould spores forming in the region."

'Keep your air conditioner on and keep the temperature to 21-22 degrees to prevent mould from spreading.'

To remove mould from a carpet Shannon Lush of ABC Local Radio recommends two tablespoons of bi-carb soda, white vinegar, and methylated spirits, as well as two teaspoons of eucalyptus and glycerine.

Ricky, the owner of Ricky's Cleaning Services in Sydney, wanted to make it clear that mould safety was the number one priority.

'To remove it, you'll need gloves and a face mask,' he told FEMAIL.

'If a room has a lot of mould, it's best to brush it off rather than spray chemicals to get rid of it.' Exit Mould can be sprayed on the area and brushed away if it's light mould.'

 

  • How to get rid of mold in seconds with vinegar
  • Why you should never use bleach to eliminate mould this winter
  • Mold
  • Cleaning mold

Leave a Comment